GW Instek PSW-Series Programming & Command manual - Manual (Page 55)

REMOTE CONTROL
55
Abort Commands
ABORt .................................................................................... 55
ABORt
Set
Description The ABORt command will cancel any triggered
actions.
Syntax ABORt
APPLy Commands
APPLy ..................................................................................... 55
APPLy
Set
Query
Description The APPLy command is used to set both the
voltage and current. The voltage and current will
be output as soon as the function is executed if the
programmed values are within the accepted range.
An execution error will occur if the programmed
values are not within accepted ranges.
The Apply command will set the voltage/current
values but these values will not be reflected on the
display until the Output is On or if the
DISPlay:MENU:NAME 3 (set menu) command is
used.
Syntax
Query Syntax APPLy {<voltage>|MIN|MAX}[,{<current>|MIN|MAX}]
APPLy?