Example output after primary system failure – HP 3PAR Operating System Software User Manual

Page 206

Advertising
background image

Asynchronous Periodic Mode System Information during Failover

When a failure occurs on systems with asynchronous periodic mode volume groups such that all
links between the systems are broken:

After 25 seconds, the system marks the sending links as Down.

After another 200 seconds, the system marks the targets as failed.

Example Output after Primary System Failure

For example, if the primary system (SystemA) becomes unavailable, the showrcopy output on the
synchronous backup system (SystemB) looks like the following:

# showrcopy

Remote Copy System Information

Status: Started, Normal

Target Information

Name ID Type Status Options Policy

SystemA 46 FC failed 2FF70002AC000060 mirror_config

SystemC 47 IP ready mirror_config

Link Information

Target Node Address Status Options

SystemA 0:2:1 20210002AC000060 Down

SystemA 1:2:1 21210002AC000060 Down

SystemC 0:4:1 10.100.33.63 Up

SystemC 1:4:1 10.101.33.63 Up

receive 0:2:1 20210002AC000060 Up

receive 1:2:1 21210002AC000060 Up

receive 0:4:1 receive Up

receive 1:4:1 receive Up

Group Information

Name Target Status Role Mode Options

multi.1.r96 SystemA Stopped Secondary Sync

LocalVV ID RemoteVV ID SyncStatus LastSyncTime

testvv.0 200 testvv.0 100 Stopped 2009-06-29 12:12:16 PDT

testvv.1 201 testvv.1 101 Stopped 2009-06-29 12:12:16 PDT

testvv.2 202 testvv.2 102 Stopped 2009-06-29 12:12:16 PDT

testvv.3 203 testvv.3 103 Stopped 2009-06-29 12:12:16 PDT

Name Target Status Role Mode Options

multi.1.r96 SystemC Backup Secondary Periodic Period 5m, over_per_alert

LocalVV ID RemoteVV ID SyncStatus LastSyncTime

testvv.0 200 testvv.0 300 Synced 2009-06-29 12:07:51 PDT

testvv.1 201 testvv.1 301 Synced 2009-06-29 12:07:51 PDT

testvv.2 202 testvv.2 302 Synced 2009-06-29 12:07:51 PDT

testvv.3 203 testvv.3 303 Synced 2009-06-29 12:07:51 PDT

If the primary system (SystemA) becomes unavailable, the showrcopy output on the asynchronous
periodic backup system (SystemC) looks like the following:

# showrcopy

Remote Copy System Information

Status: Started, Normal

Target Information

Name ID Type Status Options Policy

206 Disaster Recovery for SLD Configurations

Advertising