HP 3PAR Operating System Software User Manual

Page 215

Advertising
background image

Target Node Address Status Options

SystemA 0 10.100.33.96 Up

SystemA 1 10.101.33.96 Up

SystemB 0 10.100.33.195 Up

SystemB 1 10.101.33.195 Up

receive 0 receive Up

receive 1 receive Up

Group Information

Name Target Status Role Mode Options

multi.1.r96 SystemA Backup Secondary Periodic Period 5m, over_per_alert

LocalVV ID RemoteVV ID SyncStatus LastSyncTime

testvv.0 300 testvv.0 100 Synced 2009-06-29 12:31:44 PDT

testvv.1 301 testvv.1 101 Synced 2009-06-29 12:31:47 PDT

testvv.2 302 testvv.2 102 Synced 2009-06-29 12:31:45 PDT

testvv.3 303 testvv.3 103 Synced 2009-06-29 12:31:45 PDT

Name Target Status Role Mode Options

multi.1.r96 SystemB Started Secondary Periodic Period 5m, over_per_alert

LocalVV ID RemoteVV ID SyncStatus LastSyncTime

testvv.0 300 testvv.0 200 Synced 2009-06-29 12:32:26 PDT

testvv.1 301 testvv.1 201 Synced 2009-06-29 12:32:28 PDT

testvv.2 302 testvv.2 202 Synced 2009-06-29 12:32:27 PDT

testvv.3 303 testvv.3 203 Synced 2009-06-29 12:32:27 PDT

Solution

Problem

I/O to the volumes on the
failover system did not stop
before the synchronization.

1.

Stop I/O.

2.

Manually synchronize the remote-copy pair. On the failover system (SystemB),
enter either of the following commands:

syncrcopy <group_name>

where <group_name> represents the reversed volume group (multi.1.r96)

or:

syncrcopy -pat <pattern>

where -pat <pattern> represents the pattern of reversed volume group
names (multi*)

4.

To verify that the volume groups are started, issue the following command on the recovered
system (SystemA):

# showrcopy groups <group_name>

where <group_name> represents the volume group that should be started (multi.1).

Solution

Problem

The volume groups are not
started.

1.

On the recovered system, issue either of the following commands:

startrcopygroup <group_name>

or:

startrcopygroup -pat <pattern>

where -pat <pattern> represents the pattern of volume group names (for
example, multi*).

2.

Wait for the synchronizations to complete before continuing.

Failing Over to the Synchronous Backup System

215

Advertising