Recovery of sld remote-copy configuration – HP 3PAR Operating System Software User Manual
Page 211
4.
Verify that the asynchronous periodic backup system (SystemC) is now the backup system.
a.
Issue the showrcopy command on the asynchronous periodic backup system (SystemC).
b.
In the Group Information area, verify the following:
•
The Status of the volume groups on the asynchronous periodic backup system
(SystemC) for which the target is the synchronous backup system (SystemB) is
Started
.
•
The asynchronous periodic backup system (SystemC) and its volumes are
synchronized with the synchronous backup system (SystemB) and its volumes.
# showrcopy
Remote Copy System Information
Status: Started, Normal
Target Information
Name ID Type Status Options Policy
SystemA 42 IP failed mirror_config
SystemB 44 IP ready mirror_config
Link Information
Target Node Address Status Options
SystemA 0:3:1 10.100.33.96 Down
SystemA 1:2:1 10.101.33.96 Down
SystemB 0:3:1 10.100.33.195 Up
SystemB 1:2:1 10.101.33.195 Up
receive 0:3:1 receive Up
receive 1:2:1 receive Up
Group Information
Name Target Status Role Mode Options
multi.1.r96 SystemA Backup Secondary Periodic Period 5m, over_per_alert
LocalVV ID RemoteVV ID SyncStatus LastSyncTime
testvv.0 300 testvv.0 100 Synced 2009-06-29 12:07:51 PDT
testvv.1 301 testvv.1 101 Synced 2009-06-29 12:07:51 PDT
testvv.2 302 testvv.2 102 Synced 2009-06-29 12:07:51 PDT
testvv.3 303 testvv.3 103 Synced 2009-06-29 12:07:51 PDT
Name Target Status Role Mode Options
multi.1.r96 SystemB Started Secondary Periodic Period 5m, over_per_alert
LocalVV ID RemoteVV ID SyncStatus LastSyncTime
testvv.0 300 testvv.0 200 Synced 2009-06-29 12:16:39 PDT
testvv.1 301 testvv.1 201 Synced 2009-06-29 12:16:39 PDT
testvv.2 302 testvv.2 202 Synced 2009-06-29 12:16:39 PDT
testvv.3 303 testvv.3 203 Synced 2009-06-29 12:16:39 PDT
Recovery of SLD Remote-Copy Configuration
1.
Recover the failed system.
2.
When the primary system is ready to resume normal operation, reverse the natural direction
of data flow and resynchronize the systems.
On the failover system (SystemB), issue the following command:
# setrcopygroup recover -f -t <target_name>
Failing Over to the Synchronous Backup System
211