HP 3PAR Operating System Software - Manual (Page 257)

Quick Setup: Synchronous Long Distance Remote Copy
Table 12 Quick Setup Steps for Synchronous Long Distance Configurations
Periodic System Sync System Primary System Reference Step
— — startrcopy “Setting Up the
Primary System for 1. Start remote copy.
SLD Remote Copy”
(page 57)
— — Assuming RCFC:
creatercopytarget “Setting Up the
Primary System for
SLD Remote Copy”
(page 57)
2. Define target for
sync backup
system.
<target_name> FC
<node_WWN>
<N:S:P>:<WWN>
— — Assuming RCIP:
creatercopytarget “Setting Up the
Primary System for
SLD Remote Copy”
(page 57)
3. Define target for
periodic backup
system.
<target_name> IP
<N:S:P>:<IP_addr>
— startrcopy — “Setting Up the
Backup Systems for 4. Start remote copy.
SLD Remote Copy”
(page 59)
— Assuming RCFC:
creatercopytarget — “Setting Up the
Backup Systems for
SLD Remote Copy”
(page 59)
5. Define target for
primary system.
<target_name> FC
<node_WWN><N:S:P>:<WWN>
— Assuming RCIP:
creatercopytarget — “Setting Up the
Backup Systems for
SLD Remote Copy”
(page 59)
6. Define target for
periodic backup
system.
<target_name> IP
<N:S:P>:<IP_addr>
startrcopy — — “Setting Up the
Backup Systems for
7. Start remote copy.
SLD Remote Copy”
(page 59)
creatercopytarget
<target_name> IP
<N:S:P>:<IP_addr>
— — “Setting Up the
Backup Systems for
SLD Remote Copy”
(page 59)
8. Define target for
primary system.
creatercopytarget
<target_name> IP
<N:S:P>:<IP_addr>
— — “Setting Up the
Backup Systems for
SLD Remote Copy”
(page 59)
9. Define target for
sync backup
system.
showrcopy showrcopy showrcopy “Checking the Links
between Systems for 10. Check the links
between systems.
SLD Remote Copy”
(page 64)
Create virtual volumes
the same size as the Create virtual volumes
the same size as the Create virtual volumes. 11. Verify virtual
volumes exist. • “Verifying That
Virtual Volumes
Are Created for
volumes on the
primary systems. volumes on the
primary systems.
SLD Remote Copy”
(page 66)
•
HP 3PAR OS CLI
Administrator’s
Manual
— — creatercopygroup
<group_name>
“Creating Volume
Groups for SLD
Remote Copy” 12. Create volume
groups.
<sync_target>:sync
Quick Setup: Synchronous Long Distance Remote Copy 257