HP StorageWorks XP Remote Web Console Software - Manual (Page 107)

5. In the LDEV list, right-click the row of the external LU to be restored, and select Restore.
Figure 57 Shortcut menu of the LDEV Information window
The Status column in the selected external LU row changes to Restore.
6. Click OK. The LDEV Information window closes, and the LU Operation pane appears.
Specified contents appear in blue italics in the Device list and appear in the Preset list. To
check setting details, right-click the setting in the Preset list, and select Detail. To cancel settings,
right-click the setting in the Preset list, and select Delete.
7. Click Apply. A confirmation message appears.
8. Click OK.
The status of the external LU set in the LDEV Information window changes to Restore (restored),
and the external LU can be used in XP Command View Advanced Edition Software or Remote
Web Console.
If errors occur when changing the external LU's status, failed settings and error codes appear
in the Preset list. To check error messages, right-click the failed setting, and select Detail.
Displaying configuration information for external LUs (Volume Detail)
To display the Volume Detail window, right-click a row with an external LU from the LDEV list in
the LDEV Information window, and select Volume Detail (
Figure 57 (page 107) ). If you select an
external LU that is a LUSE volume in the LDEV list, the Volume Detail window displays a list of all
LDEVs that make up the LUSE volume.
Checking an external LU's status (LDEV Information) 107