HP StorageWorks XP Remote Web Console Software User Manual
Page 83
•
Set button
If you select the port (external array WWN) you want to set as the candidate for the primary
and alternate paths in Unselected Paths, and click Set, the selected WWN moves to Selected
Paths.
•
Release button
If you select the port (external array WWN) you want to exclude from the list of candidates
for the primary and alternate paths in Selected Paths, and click Release, the selected WWN
moves to Unselected Paths.
•
OK button
Saves settings in the Select Paths pane, and closes the pane.
•
Cancel button
Cancels all settings in the Select Paths pane, and closes the pane.
To map one individual LU as one internal LDEV:
1.
Select the LU Operation tab. The LU Operation pane appears.
2.
In the Device tree, select Discovery. WWNs appear in the tree indicating external array ports
that can be connected.
3.
In the Device tree, select the port (WWN) you want to connect from the WWNs listed in the
Device.
External LUs that can be connected from the external array port (WWN) selected in the tree
appear in the Device list.
4.
Right-click the external LU you want to map as an internal LDEV in the Device list, and select
Add LU. The Add LU window appears.
5.
Select the internal LDEV that is mapped to the external LU selected in the Device list on the
Add LU window. Enter the following items in the Add LU window:
a.
In the ExG box, select an external LU group number.
b.
From the Emulation Type list, select an emulation type.
c.
In the LDEV box, select the number of volumes to create.
d.
Select the IO Suppression mode.
e.
Select the Cache Mode.
f.
In the Alternate Path box, select the number of alternate paths that are automatically set.
g.
In the CLPR box, select the CLPR to be used. To limit the CU selection range, select the
Limited check box.
h.
In the CU# list, select the CU number.
i.
To map two or more external LU at the same time, select the interval that arranges each
volume in the Interval box.
Discovering and Mapping LUs
83