HP StorageWorks XP Remote Web Console Software - Manual (Page 128)

Notices about remote command devices
•
You can map command devices as remote command devices when one of the following arrays
is connected as an external array:
◦ Virtual Storage Platform subsystem
◦ Universal Storage Platform V subsystem
◦ Universal Storage Platform VM subsystem
◦ XP12000 Disk Array
◦ XP10000 Disk Array
◦ HP 200 Storage Virtualization System
◦ XP1024/XP128 Disk Array
◦ TagmaStore™ Universal Storage Platform subsystem
◦ TagmaStore™ Network Storage Controller subsystem
◦ TagmaStore™ Adaptable Modular Storage subsystem
◦ TagmaStore™ Workgroup Modular Storage subsystem
◦ Lightning 9900V series subsystem
◦ Thunder 9500V series subsystem
◦ SANRISE Universal Storage Platform subsystem
◦ SANRISE Network Storage Controller subsystem
◦ Virtual Storage Platform VP9500 subsystem
◦ H24000 subsystem
◦ H20000 subsystem
◦ SANRISE Adaptable Modular Storage subsystem
◦ SANRISE Workgroup Modular Storage subsystem
◦ SANRISE9900V series subsystem
◦ P9500 subsystem
◦ XP24000 subsystem
◦ XP20000 subsystem
◦ SANRISE9500V series subsystem
◦ SANRISE H12000 subsystem
◦ SANRISE H10000 subsystem
◦ SANRISE H1024/H128 subsystem
•
You do not need a license for XP External Storage or XP Flex Copy to map command devices
as remote command devices.
•
Remote command devices are displayed on XP External Storage's panes.
As you select an external LU group number in the Device tree on the LU Operation pane, the
information shown in
Table 9 (page 128) appears.
Table 9 Information displayed in the Device column for remote command devices
Information displayed in Device column of
Device list Storage array
Format: “Emulation Type” + “-CM” Virtual Storage Platform subsystem
128 Remote command devices