HP StorageWorks XP Remote Web Console Software - Manual (Page 92)

18. Click OK. The mapping set in the Auto Map Setting window is applied to the local array, and
the specified contents appear in the Device list.
When an error occurs during the external LU mapping process, the failed setting and an error
code appears in the Preset list. To check the error message, right-click the failed setting, and
select Detail.
Displaying detailed information stored in VMA (VMA information)
When VMA of XP LUN Security Extension is set for an external LU, you can check information
stored in the VMA before mapping the LU. Information stored in the VMA appears in the VMA
Information pane (
Figure 50 (page 92) ). To view the VMA Information pane, select WWN in the
Device tree, and select the external array's port. Right-click the volume you want to display, and
select VMA Information.
For more information about items displayed in the VMA Information pane, see the HP LUN Security
XP Extension user guide.
Figure 50 VMA Information pane
•
Vendor
External array's vendor.
•
Product
External array's product name.
•
LUN
LU number of the external LU.
•
Attribute
Select from the following access attributes:
◦ Read/Write: Read and write operations can be performed on the volume.
◦ Read Only: Only read operations can be performed on the volume.
◦ Protect: You cannot access the volume. Read and write operations cannot be performed.
•
S-Vol
Indicates whether or not the volume can be specified as an S-VOL: Enable or Disable.
92 Configuring external LUs