HP StorageWorks XP Remote Web Console Software - Manual (Page 74)

•
Attribute
Port attribute. External ports are used for connecting to the external array. To set a remote
command device, you can use the port for which the Initiator/External MIX mode has been
set.
•
PCB Mode
Port's PCB mode. Standard, High Speed, or MIX (for Initiator/External MIX mode) appears.
External ports do not have High Speed mode. For more information about the PCB mode, see
the HP XP LUN Configuration and Security Manager user guide: HP XP12000 Disk Array, HP
XP10000 Disk Array, HP 200 Storage Virtualization System. For more information about the
Initiator/External MIX mode, see
Using Continuous Access XP or Continuous Access XP Journal
with remote command devices .
Preset list (Port Operation pane)
This list displays rows from the Port Operation list that are about to be acted on. Check the contents
of the Preset list before applying them to the local array. Contents displayed in the Preset list appear
in blue italics in the Port Operation list. When you click Apply in the Port Operation pane, actions
designated in the Preset list are applied to the local array and the contents of the Preset list
disappear.
If you click Cancel in the Port Operation pane, all designated actions in the Preset list are canceled.
If settings in the Preset list contain errors, actions are not applied to the local array even if you
click Apply. In that case, error messages appear, incorrect settings appear in the Preset list, and
error codes appear in the Preset list.
When you right-click a setting in the Preset list, the following commands appear:
•
Detail
Displays the Preset Detail window with detailed information about actions selected in the
Preset list. When an error code appears in the Preset list, a corresponding error message
appears in the Preset Detail window.
Figure 40 Preset Detail window (changing port attribute)
•
Delete
Cancels actions selected in the Preset list.
74 XP External Storage panes