HP StorageWorks XP Remote Web Console Software User Manual
Page 84
j.
Select one or more external LUs, and select one or more cells in the LDEV map.
When selecting two or more external LUs in the CU:LDEV list, if you select one cell of the
internal LDEV number in the LDEV map, the number of cells automatically selected is the
same as the number external LUs selected in the CU:LDEV list with the selected internal
LDEV first. When Interval is set, mapping is done at intervals of the specified number.
•
To map all the external LUs displayed in the CU:LDEV list at one time:
Click Linear, and select an internal LDEV on the LDEV map. The same number of
internal LDEVs as the external LUs listed in the CU:LDEV list are automatically selected
on the LDEV map following the internal LDEV you selected (
).
The LDEV numbers of the selected XP LDEV are in a series. When Interval is set, the
mapping is done at the specified interval.
Figure 44 Add LU pane (mapping using the Linear button)
•
To map one external LU to another internal LDEV:
After automatically mapping the external LU using the Linear button, release the
Linear button, and map the external LU individually (
).
Figure 45 Add LU pane (mapping with the Linear button released
84
Configuring external LUs