HP StorageWorks XP Remote Web Console Software - Manual (Page 78)

Discovering and Mapping LUs
After setting the port used for XP External Storage to External, map the external LU as an internal
LDEV.
If you mapped the external LU and previously set the VMA of XP LUN Security Extension in that
volume, the former VMA setting is overwritten when you map the volume again. However, if XP
LUN Security Extension is not installed when you remap the volume, the volume with the VMA
setting cannot be mapped.
Following are the operations related to mapping:
•
Mapping external LUs individually (Add LU)
•
Mapping multiple external LUs at one time (Add LU (Auto))
•
Displaying detailed information stored in VMA (VMA information)
Mapping external LUs individually (Add LU)
This section describes mapping operations starting with the Add LU command. Use the Add LU
(
Figure 42 (page 78) ), Select Paths ( Figure 43 (page 82) ), SSID ( Figure 46 (page 85) ), and Set
SSID ( Figure 47 (page 86) ) panes for mapping external LUs individually.
NOTE: Before mapping the external LU, ensure that no other applications (such as XP RAID
Manager) that use the command device are executing. Stop any applications that are executing.
Figure 42 Add LU window
•
Vendor
External array's vendor.
•
Product
External array's product name.
•
Serial
External array's product serial number.
•
WWN
World Wide Name of the external array port used for connecting to the local array.
78 Configuring external LUs