HP StorageWorks XP Remote Web Console Software - Manual (Page 73)

•
Target
When selected, displays ports designated as host target ports (used for host connect).
•
RCU Target
When selected, displays ports designated as an RCU target (receiving) port (used for XP
Continuous Access, Hitachi TrueCopy for z/OS, XP Continuous Access Journal, Hitachi
Universal Replicator for z/OS, and so on).
•
Initiator/External
When selected, displays ports for which the Initiator/External MIX mode is set.
•
Port number
Displays ports assigned to each port attribute in the branch below each port attribute. XP
External Storage uses ports set to external. One of the following icons appears on the left of
each port number:
Description Icon
Port in Standard mode.
Port in High Speed mode.
Port in Initiator/External MIX mode.
Port Operation list
Displays ports in the local array that XP External Storage can use or set. The port information
displayed corresponds to the item selected in the Port tree.
You can sort the list by attribute. For example, to sort by port numbers, click Port on the list.
Rows corresponding to ports that are about to be acted upon appear in the Preset list, and the
corresponding row in the Port Operation list appears in blue italics.
Figure 39 Port Operation list
•
Port
Port number. One of the following icons appears for each port:
Description Icon
Port in Standard mode.
Port in High Speed mode.
Port in Initiator/External MIX mode.
Port Operation pane 73