HP StorageWorks XP Remote Web Console Software - Manual (Page 82)

The OK button is available when mapping on the Add LU window is complete.
•
Cancel button
Cancels all mapping operations, closes the Add LU window, and returns to the LU Operation
pane.
Select Paths pane
All paths that can be set as primary and alternate paths appear in the Select Paths pane. To set a
specific path as the alternate path, use the Select Paths pane to specify candidates for the alternate
paths.
If you let alternate paths be automatically set with all connected normal paths as candidates, you
can omit the setting operation on the Select Paths pane.
Figure 43 Select Paths pane
•
Port
Local array ports. You can set alternate paths for the selected port. One of the following icons
appears for each port:
Description Icon
Port in Standard mode.
Port in Initiator/External MIX mode.
•
Selected Paths
External array port for which you can set the alternate path connecting to the local array port
selected in the Port list. By default, all ports that can be set as alternate paths appear. The
WWN identifying the external array port appears. If the primary path and as many alternate
paths as you set in Alternate Path in the Add LU pane cannot be set with the paths selected
in Selected Paths, an error occurs and appears in the Preset list.
•
Unselected Paths
Ports excluded from being candidates for the ports setting the primary and alternate paths
appear among the external array ports that can be set as the primary and alternate paths.
WWNs identifying the external array ports appear in the list.
82 Configuring external LUs