HP StorageWorks XP Remote Web Console Software User Manual
Page 129
Table 9 Information displayed in the Device column for remote command devices (continued)
Information displayed in Device column of
Device list
Storage array
Universal Storage Platform V subsystem
Example: OPEN-V-CM, OPEN-3-CM
Universal Storage Platform VM subsystem
XP12000 Disk Array
XP10000 Disk Array
HP 200 Storage Virtualization System
XP1024/XP128 Disk Array
TagmaStore™ Universal Storage Platform subsystem
TagmaStore™ Network Storage Controller subsystem
Virtual Storage Platform VP9500 subsystem
H24000 subsystem
H20000 subsystem
Lightning 9900V series subsystem
SANRISE Universal Storage Platform subsystem
SANRISE Network Storage Controller subsystem
P9500 subsystem
XP24000 subsystem
XP20000 subsystem
SANRISE9900V series subsystem
SANRISE H12000 subsystem
SANRISE H10000 subsystem
SANRISE H1024/H128 subsystem
DF600F-CM
TagmaStore™ Adaptable Modular Storage subsystem
TagmaStore™ Workgroup Modular Storage subsystem
Thunder 9500V series subsystem
SANRISE Adaptable Modular Storage subsystem
SANRISE Workgroup Modular Storage subsystem
SANRISE9500V series subsystem
•
If you access a remote command device from an OPEN host, the remote command device
reports device information about the command device, which is mapped as a remote command
device of the external array.
Device information about the command device that the remote command device reports to
the host includes:
◦
Serial number
◦
Vendor
◦
Device name
NOTE:
The device name reported to the host is the same as the one displayed in the
Device column of the Device list. For the device names reported to the host, see
.
•
Even if the status of the remote command device is normal, an error may occur when the
operations or commands are performed on the remote command device.
If an error occurs even though the status of the remote command device is normal, check the
status of the command device of the external array, not the remote command device.
Notices about remote command devices
129