HP StorageWorks XP Remote Web Console Software - Manual (Page 65)

– Warning: There are paths whose status is not normal. Check the status of the paths.
– Checking: Process of checking the paths' defined configuration informations is in
progress.
•
WWN of the external array
Port: Port number of the local array connected to the port identified by the WWN selected
in the Port tree. One of the following icons appears for each port:
Description Icon
◦
Port in Standard mode.
Port in Initiator/External MIX mode.
◦ WWN: WWN of the external array selected in the Port tree.
◦ LUN: External array's LU number.
◦ Characteristic: External LU's identification number.
◦ Group: External LU group number and reference number assigned to each LU in the
external LU group. XP External Storage automatically assigns reference numbers to LUs
in the group when the external LUs are mapped. This is displayed in the format of “external
LU group number - reference number of volume in the group”.
◦ Status: Status of the path configured by the port of the local array and the port of the
external array identified by the WWN. One of the following statuses is displayed:
– Normal: Path is normal.
– Unknown: Path status is unknown.
– Blockade: Path is blocked.
– External device setting changed: External array setting changed. For example, the
path definition was deleted, or the external array itself was replaced by another
device.
– LDEV size reduced: External array's volume capacity setting changed (volume capacity
was reduced).
– Not ready: External array replied NOTREADY.
– Illegal request: External array replied ILLEGALREQUEST.
– Command aborted: External array replied ABORTEDCOMMAND.
– Busy: External array is in BUSY status.
– LDEV reserved: External array is in Reserve status.
– Response error: External array is in blocked status caused by an abnormal reply
(Response).
– Initiator port: External array's port attribute changed to the initiator port.
– Unknown port: External array's port attribute is unknown.
– Cannot detect port: Path was removed or external array's port could not be found.
– Internal error: Program error occurred, or there is a logical contradiction.
– Timeout: Processing was retried because an abnormal reply (Response) was returned;
however, processing was stopped by a timeout.
LU Operation pane 65