Main menu, Enter date/time – Ashcroft ATE-2 - Handheld Calibrator User Manual

Page 28

Advertising
background image

26

SECTION 15 b.

BASE UNIT SET UP

SECTION 15 b. i.

Programming Date & Time

Main Menu

24v Loop Supply On/Off

Units…

Setup…

Modes…

Datalog…

to move the selection box in a MENU UP or DOWN, and are also

used to scroll through programmable parameters such as alpha

numeric characters when programming names.
LEFT and RIGHT ARROW Keys

DAMP/LEFT ARROW and TARE/RIGHT ARROW keys are dual

function keys which are used in MENU Mode to move the cursor

to the right or left.
FLIP/DEL key when in Programming Mode is used to zero a

numeric character or advance an alpha character to a blank

space.
Upon entering MENU Mode the display will show “Main Menu”

and a list of MENU selections will appear below.
Use the UP and DOWN ARROWs to scroll to the desired param-

eter then press ENTER to begin working with that parameter.

The HHC allows the user to set up several parameters which

remain stored in memory for the life of the base unit, or need to

be reprogrammed very infrequently. These parameters include

date, time of day, Owner, and auto off timers.

Note: Date and time will need to be reprogrammed following

factory replacement of the real time clock battery approximately

once every 6 years.

Programming Date and Time
Note: time is entered in 24 hour military format.
Press MENU key

Press DOWN or UP ARROW key to highlight “Setup…”

Press ENTER

Press DOWN or UP ARROW key to highlight “System”

Press ENTER

Press DOWN or UP ARROW key to highlight “Date/Time…”

Press ENTER

Press LEFT or RIGHT ARROW to select numeric position for

month, date, year, hour, minute and second

Press UP or DOWN ARROW to change numeric values
When correct MM/DD/YY and HH:MM:SS values are displayed

press ENTER to accept and save
The HHC will save and exit to Measurement Mode.
Note: if an inappropriate date or time value is used, the HHC will

display an error message ”Date Set Failed” and prompt the user

to retry or abort the attempt to program.

SECTION 15 a.

MENU MODE GENERAL KEY

FUNCTIONS CONT.

Enter Date/Time

MM/DD/YY HH:MM:SS

12/25/93 14:26:07

^

Enter to accept

Esc to cancel

Ꮨƽ

Ꮨƽ

Ꮨƽ

Advertising