Allied Telesis AT-S63 - Manual (Page 110)

Chapter 5: MAC Address Table
110 Section I: Basic Operations
Adding Static Unicast and Multicast MAC Addresses
This section contains the procedure for adding static unicast and multicast
MAC addresses to the switch. You can assign up to 255 static addresses
per port on the AT-9400 Switch.
To add a static MAC address, perform the following procedure:
1. From the Main Menu, type 4 to select MAC Address Tables.
The MAC Address Tables menu is shown in Figure 30 on page 106.
2. From the MAC Address Tables menu, type 2 to select MAC Addresses
Configuration.
The MAC Addresses Configuration menu is shown in Figure 34.
Figure 34. MAC Addresses Configuration Menu
3. From the MAC Addresses Configuration menu, type 1 to select Add
static MAC address.
The following prompt is displayed:
Please enter MAC address ->
4. Enter the static unicast or multicast MAC address in the following
format:
XXXXXX XXXXXX
After you have specified the MAC address, the following prompt is
displayed:
Enter port-list: [1 to 24] ->
Allied Telesis AT-9424T/SP - AT-S63
Marketing
User: Manager 11:20:02 02-Mar-2005
MAC Addresses Configuration
1 - Add Static MAC Address
2 - Delete MAC Address
3 - Delete All Dynamic MAC Addresses
R - Return to Previous Menu
Enter your selection?