Allied Telesis AT-S63 - Manual (Page 484)

Chapter 24: Port-based and Tagged VLANs
484 Section VI: Virtual LANs
If you added or removed from the VLAN a port with one or more static
MAC addresses assigned to it, you must update the static addresses
by deleting their entries from the MAC address table and reentering
them again using the VID of the VLAN to which the port has been
moved to. For information on how to add static MAC addresses, refer
to “Adding Static Unicast and Multicast MAC Addresses” on page 110.
For instructions on how to delete addresses, refer to “Deleting Unicast
and Multicast MAC Addresses” on page 112.
8. Press any key.
The Modify VLAN menu in Figure 174 on page 481 is displayed again.
9. Repeat this procedure starting with Step 4 to modify other VLANs.
10. To permanently save your changes, return to the Main Menu and type
S to select Save Configuration Changes.