Allied Telesis AT-S63 - Manual (Page 540)

Chapter 28: MAC Address-based VLANs
540 Section VI: Virtual LANs
Deleting a MAC Address-based VLAN
Note
To delete a VLAN, you need to know its VID. To view VLAN VIDs,
refer to “Displaying MAC Address-based VLANs” on page 542.
To delete a VLAN, perform the following procedure:
1. From the Main Menu, type 2 to select VLAN Configuration.
The VLAN Configuration menu is shown in Figure 171 on page 472.
2. From the VLAN Configuration menu, type 3 to select Configure
VLANs.
The Configure VLANs menu is shown in Figure 172 on page 473.
3. From the Configure VLANs menu, type 3 to select Delete VLAN.
The Delete VLAN menu is shown in Figure 200.
Figure 200. Delete VLAN Menu
4. From the Delete VLAN menu, type 1 to select VLAN ID (VID).
The following prompt is displayed:
Enter new value -> [2 to 4094] ->
5. Enter the VID of the VLAN you want to delete. You can specify only
one VID at a time.
Note
You cannot delete the Default_VLAN, which has a VID of 1.
Allied Telesis AT-9448T/SP - AT-S63
Marketing
User: Manager 11:20:02 02-Mar-2005
Delete VLAN
1 - VLAN ID (VID) ........
R - Return to Previous Menu
Enter your selection?