Allied Telesis AT-S63 - Manual (Page 253)

AT-S63 Management Software Menus User’s Guide
Section II: Advanced Operations 253
The Flow Group Configuration menu is shown in Figure 90.
Figure 90. Flow Group Configuration Menu
4. From the Flow Group Configuration menu, type 1 to select Create Flow
Group.
The Create Flow Group menu is shown in Figure 91.
Figure 91. Create Flow Group Menu
5. Configure the following parameters as desired:
1 - Flow Group ID
Specifies an ID number for the flow group. Each flow group on the
switch must have a unique number. The range is 0 to 1023. The
default is 0. This parameter is required.
Allied Telesis AT-9424T/SP - AT-S63
Marketing
User: Manager 11:20:02 02-Mar-2005
Flow Group Configuration
1 - Create Flow Group
2 - Modify Flow Group
3 - Destroy Flow Group
4 - Show Flow Groups
R - Return to Previous Menu
Enter your selection?
Allied Telesis AT-9424T/SP - AT-S63
Marketing
User: Manager 11:20:02 02-Mar-2005
Create Flow Group
1 - Flow Group ID ..............
2 - Description ...............
3 - DSCP value ................
4 - Priority ..................
5 - Remark Priority ...........
6 - ToS .......................
7 - Move ToS to Priority ...... No
8 - Move Priority to ToS ...... No
9 - Classifier List ...........
C - Create Flow Group
R - Return to Previous Menu
Enter your selection?