Allied Telesis AT-S63 - Manual (Page 526)

Chapter 27: Protected Ports VLANs
526 Section VI: Virtual LANs
The Modify VLAN menu expands to contain all relevant information
about the VLAN, as shown in Figure 194.
Figure 194. Expanded Modify VLAN Menu
6. Adjust the following parameters as necessary.
1 - VLAN Name
Use this selection to change the name of a VLAN. The name can be
from one to fifteen alphanumeric characters in length. The name
cannot contain spaces or special characters, such as asterisks (*) or
exclamation points (!).
Note
A VLAN must have a name.
2 - VLAN ID (VID)
This is the VLAN’s VID value. You cannot change this value.
3- VLAN Type
This identifies the VLAN as a protected ports VLAN. This option can
not be changed.
4 - Tagged Ports
Use this selection to specify the tagged ports of the VLAN. You can
specify the ports individually (e.g., 2,3,5), as a range (e.g., 7-9), or both
(e.g., 2,5,7-9). The new list of tagged ports replaces the existing list. To
retain tagged ports, you must include them in the new list.
5 - Untagged Ports
Use this selection to specify the untagged ports of the VLAN. You can
specify the ports individually (e.g., 2,3,5), as a range (e.g., 7-9), or both
(e.g., 2,5,7-9). The new list of untagged ports replaces the existing list.
To retain untagged ports, you must include them in the new list.
Allied Telesis AT-9424T/SP - AT-S63
Marketing
User: Manager 11:20:02 02-Mar-2005
Modify VLAN
1 - VLAN Name .............. Internet_1
2 - VLAN ID (VID) .......... 3
3 - VLAN Type .............. Protected
4 - Tagged Ports ........... 7,9
5 - Untagged Ports ......... 20-24
6 - Protected Ports ........ Yes
M - Modify VLAN
R - Return to Previous Menu
Enter your selection?