Allied Telesis AT-S63 - Manual (Page 51)

AT-S63 Management Software Menus User’s Guide
Section I: Basic Operations 51
If you respond with yes, the following prompt is displayed:
Do you want to reset the serial port baud rate to 9600
bps? [Yes/No] ->
5. To return the baud rate of the terminal port on the switch to 9600 bps,
type Y for yes. To retain its current speed setting, type N for no.
All of the operating parameters on the switch are automatically
returned to their default settings as the unit reboots.
Caution
The switch does not forward traffic while it initializes its operating
software, a process that takes from 20 seconds to several minutes
to complete, depending on the number and complexity of commands
in the boot configuration file. Some packet traffic may be lost. You
must reestablish your management session if you want to continue
managing the switch.
To overwrite the settings in the active boot configuration file and return
the file to the switch’s default settings, perform steps 6 and 7.
6. Reestablish your management session.
7. From the Main Menu, type S to select Save Configuration Changes.