Allied Telesis AT-S63 - Manual (Page 564)

Chapter 30: MAC Address-based Port Security
564 Section VIII: Port Security
ˆ If you selected Limited, several new menu options are added to the
Configure Port Security menu, as shown in Figure 209. Continue
with Step 8 for instructions on configuring a port operating under
the Limited security level.
Figure 209. Configure Port Security Menu #2
8. To specify the maximum number of dynamic MAC addresses you want
the port to be able to learn, do the following:
a. Type 2 to select Threshold.
The following prompt is displayed:
Enter port security threshold: [1 to 255] -> 100
b. Enter the maximum number of dynamic MAC addresses you want
the port to be able to learn. The range is 1 to 255. The default is
100.
9. To set the intrusion action for the port, do the following:
a. Type 3 to select Intruder Action.
The following prompt is displayed:
Enter intrusion action: (N-Discard, T-Trap, D-
Disable):
b. Select the desired intrusion action:
N - Discard: The port discards invalid frames. This is the default.
T - Trap: The port discards invalid frames and sends an SNMP
trap.
D - Disable: The port discards invalid frames, sends an SNMP
trap, and disables the port.
Allied Telesis AT-9424T/SP - AT-S63
Marketing
User: Manager 11:20:02 02-Mar-2005
Configure Port Security
Configuring Port Security 4
1 - Security Mode ..................... Limited
2 - Intruder Action ................... No Action
3 - Port Participating ................ No
4 - Threshold ......................... 100
D - Set Default Port Security
R - Return to Previous Menu
Enter your selection?