Allied Telesis AT-S63 - Manual (Page 217)

AT-S63 Management Software Menus User’s Guide
Section II: Advanced Operations 217
Displaying the
Log Output
Definition Details
To view the settings of a log output definition, perform the following
procedure:
1. From the Main Menu, type 5 to select System Administration.
2. From the System Administration menu, type 8 to select Event Log.
The Event Log menu is shown in Figure 63 on page 198.
3. From the Event Log menu, type L to select Configure Log Outputs.
The Configure Log Outputs menu is shown in Figure 67 on page 210.
4. From the Configure Log Outputs menu, type 4 to select View Log
Output Details.
The following prompt is displayed:
Enter output ID to view [0 to 20] ->
5. Enter the number of the log output that you want to view.
The Syslog Output Configuration menu for the selected output is
displayed. An example is shown in Figure 70.
Figure 70. Syslog Output Configuration Menu for Selected Output ID
To modify the log output configuration, refer to “Modifying a Log
Output” on page 215.
6. Return to the Main Menu.
Allied Telesis AT-9424T/SP - AT-S63
Marketing
User: Manager 11:20:02 02-Mar-2005
Syslog Output Configuration
1 - Output ID ................ 3
2 - Server IP Address ........ 149.35.87.45
3 - Output Status ............ Enabled
4 - Message Format ........... Extended
5 - Facility Level ........... DEFAULT
6 - Event Severity ........... E,W,I
7 - Event Module ............. All
R - Return to Previous Menu
Enter your selection?