Allied Telesis AT-S63 - Manual (Page 269)

AT-S63 Management Software Menus User’s Guide
Section II: Advanced Operations 269
The Show Traffic Classes menu provides the following information:
ID
The traffic class’ ID number.
Description
A description of the traffic class.
Parent Policy ID
The ID number of the policy where the traffic class is assigned. A traffic
class can belong to only one policy at a time.
Active
The status of the traffic class. If the traffic class is part of a QoS policy
that is assigned to one or more ports, the traffic class is deemed active.
If the traffic class has not been assigned to a policy or if the policy has
not been assigned to any ports, the traffic class is deemed inactive.
5. To display the specifics of a traffic class, type D to select Display
Traffic Class Details.
6. When prompted, enter the ID number of the traffic class you want to
view. You can display only one traffic class at a time.
An example of the Display Traffic Class Details menu is shown in
Figure 101.
Figure 101. Display Traffic Class Details Menu
Allied Telesis AT-9424T/SP - AT-S63
Marketing
User: Manager 11:20:02 02-Mar-2005
Display Traffic Class Details
1 - Traffic Class ID .......... 0
2 - Description ............... Dev Database
3 - Exceed Action ............. Drop
4 - Exceed Remark Value ....... 0
5 - DSCP value ................ 0
6 - Max bandwidth ............. 50
7 - Burst Size ................ 0
8 - Priority .................. 0
9 - Remark Priority ........... No
A - ToS .......................
B - Move ToS to Priority ...... No
D - Move Priority to ToS ...... No
E - Flow Group List ........... 11
U - Update Display
R - Return to Previous Menu
Enter your selection?