Allied Telesis AT-S63 - Manual (Page 186)

Chapter 10: File Downloads and Uploads
186 Section II: Advanced Operations
The prompt “Downloading” is displayed.
9. Begin the file transfer of the system file using the terminal emulator
program.
Steps 10 through 14 illustrate how to download a system file using the
Hilgraeve HyperTerminal program.
10. From the HyperTerminal main window, select Send File from the
Transfer menu, as shown in Figure 58.
Figure 58. HyperTerminal Window
The Send File window is shown in Figure 59.
Figure 59. Send File Window
11. Click Browse and specify the location and system file to be
downloaded onto the switch.
12. Click in the Protocol field and select as the transfer protocol either
Xmodem or, for a faster download, 1K XModem.
13. Click Send.