Allied Telesis AT-S63 - Manual (Page 229)

AT-S63 Management Software Menus Interface User’s Guide
Section II: Advanced Operations 229
7. Repeat steps 5 and 6 to adjust any other variables necessary to define
the traffic flow for this classifier.
8. After configuring the necessary variables, type C to select Create
Classifier.
The switch creates the classifier. If any of the settings are
incompatible, the system displays an error message.
9. To create more classifiers, repeat this procedure starting with step 3.
10. To permanently save your change, return to the Main Menu and type S
to select Save Configuration Changes.
11. To add classifiers to an ACL, refer to “Creating an ACL” on page 238.
To add classifiers to a QoS policy, refer to “Managing Flow Groups” on
page 258.