Allied Telesis AT-S63 - Manual (Page 44)

Chapter 1: Basic Switch Parameters
44 Section I: Basic Operations
Note
Item 1 - File Operations, is described in Chapter 9, ”File System” on
page 151. Item 2 - Downloads and Uploads is described in Chapter
10, ”File Downloads and Uploads” on page 173. Ping a Remote
System, item 3, is described in “Pinging a Remote System” on
page 49. Reset to Factory Defaults, item 4, is described in
“Returning the AT-S63 Management Software to the Factory Default
Values” on page 50.
3. From the System Utilities menu, type 5 to select Reboot the switch.
The following prompt is displayed:
The switch is about to reboot. Do you want to proceed?
[Yes/No] ->
4. Type Y to reboot the switch or N to cancel the procedure.