Allied Telesis AT-S63 - Manual (Page 33)

AT-S63 Management Software Menus Interface User’s Guide
Section I: Basic Operations 33
The System Configuration menu is shown in Figure 2.
Figure 2. System Configuration Menu
Note
Selections 1 to 4 are described in “Displaying the IP Address of the
Local Interface” on page 557. Selection 8, ARP Cache Timeout, is
described in “Setting the ARP Cache Timeout” on page 560.
Selection T, Configure System Time, is described in “Setting the
System Time” on page 38.
3. Adjust options 5 to 7 as necessary.
5 - System Name
This parameter specifies a name for the switch (for example, Sales
Ethernet switch). The name is displayed at the top of the management
menus and pages. The name can be from 1 to 39 characters. The
name can include spaces and special characters, such as exclamation
points and asterisks. The default is no name. This parameter is
optional.
6 - Location
This parameter specifies the location of the switch, (for example, 4th
Floor - rm 402B). The location can be from 1 to 20 characters. The
location can include spaces and special characters, such as dashes
and asterisks. The default is no location. This parameter is optional.
7 - Administrator
This parameter specifies the name of the network administrator
responsible for managing the switch. The name can be from 1 to 20
characters. It can include spaces and special characters, such as
Allied Telesis AT-9424Ts - AT-S63
Marketing
User: Manager 11:20:02 02-Mar-2006
System Configuration
1 - Eth0 Interface............. vlan2-0
2 - IP Address ................ 184.35.62.11
3 - Subnet Mask ............... 255.255.255.0
4 - Default Gateway ........... 184.35.62.4
5 - System Name ...............
6 - Location ..................
7 - Administrator .............
8 - ARP Cache Timeout ......... 150 seconds
T - Configure System Time
I - Configure Interface
R - Return to Previous Menu
Enter your selection?