Allied Telesis AT-S63 - Manual (Page 408)

Chapter 20: SNMPv3
408 Section IV: SNMPv3
Displaying the
Display SNMPv3
View Table Menu
This section describes how to display the Display SNMPv3 View Table
menu. For information about the SNMPv3 View Table parameters, see
“Creating an SNMPv3 View Table Entry” on page 329.
To display the Display SNMPv3 View Table menu, perform the following
procedure.
1. Display the Display SNMPv3 Table menu by performing steps 1
through 3 in “Displaying the Display SNMPv3 User Table Menu” on
page 406. Or, from the Main menu type 5->5->6.
2. From the Display SNMPv3 Table menu, type 2 to select Display
SNMPv3 View Table.
The Display SNMPv3 View Table menu is shown in Figure 137.
Figure 137. Display SNMPv3 View Table Menu
Allied Telesis AT-9424T/SP - AT-S63
Marketing
User: Manager 11:20:02 02-Mar-2005
Display SNMPv3 View Table
View Name ................... tcp
Subtree OID ................. 1.3.6.1
Subtree Mask ................
View Type ................... Included
Storage Type ................ NonVolatile
Row Status .................. Active
N - Next Page
U - Update Display
R - Return to Previous Menu
Enter your selection?