Allied Telesis AT-S63 - Manual (Page 235)

AT-S63 Management Software Menus Interface User’s Guide
Section II: Advanced Operations 235
Number of References
The number of active and inactive ACL and QoS policy assignments
for the classifier. An active ACL or QoS policy has been assigned to a
switch port while an inactive ACL or policy has not been assigned to a
port. If this number is 0 (zero), the classifier has not been assigned to
any ACLs or policies.
Number of Active Associations
The number of active ACLs and QoS policy assignments for the
classifier. An active ACL or policy has been assigned to a switch port.
You can use this number together with the Number of References to
determine the number of inactive ACLs and policies for a classifier. For
example, if Number of References for a classifier is 5 and the Number
of Active Associations is 3, two of the ACL or QoS policy assignments
for the classifier have not been assigned to a switch port.
4. To view the details of a classifier, type D to select Detail Classifier
Display.
The following prompt is displayed:
Enter Classifier ID : [1 to 9999] -> 1
5. Enter the ID number of the classifier you want to display.
The first page of the Display Classifier Details menu is shown in Figure
76.
Figure 76. Display Classifier Details Menu (Page 1)
Allied Telesis AT-9424T/SP - AT-S63
Marketing
User: Manager 11:20:02 02-Mar-2005
Display Classifier Details
01 - Classifier ID: . 1
02 - Description: ... IP flow
03 - Dst MAC: .......
04 - Src MAC: .......
05 - Priority: ......
06 - VLAN ID: .......
07 - Protocol: ...... 0x800 (IP)
08 - IP ToS: ........
09 - IP DSCP: .......
10 - IP Protocol: ...
N - Next Page
U - Update Display
R - Return to Previous Menu
Enter your selection?