Allied Telesis AT-S63 - Manual (Page 607)

AT-S63 Management Software Menus Interface User’s Guide
Section IX: Management Security 607
Importing an Encryption Key
Use the following procedure to import a public key from the AT-S63 file
system into the key management database. If a file contains both public
and private keys, only the public key is imported. The private key is
ignored.
Note
It is unlikely that you will ever need to perform this procedure. A
switch can only use those public keys that it has generated itself.
This procedure starts from the Key Management menu. If you are unsure
how to display the menu, perform steps 1 to 3 in “Creating an Encryption
Key” on page 598.
To import a public key, perform the following procedure:
1. From the Main Menu, type 7 to select Security and Services.
The Security and Services menu is shown in Figure 71 on page 226.
2. From the Security and Services menu, type 7 to select Keys/Certificate
Configuration.
The Keys/Certificate Configuration menu is shown in Figure 213 on
page 598.
3. From the Keys/Certificates Configuration menu, type 2 to select Key
Management.
The Key Management menu is shown in Figure 214 on page 599.
4. From the Key Management menu, type 5 to select Import Key From
File to import an RSA - Public key.