Allied Telesis AT-S63 - Manual (Page 569)

AT-S63 Management Software Menus Interface User’s Guide
Section VIII: Port Security 569
Intruder Action
The action taken by a port if it receives an invalid frame while operating
in the Limited security mode. The possible settings are:
ˆ Discard - The port discards invalid frames. This is the default.
ˆ Trap - The port discards invalid frames and sends a trap.
ˆ Trap/Disable - The port discards invalid frames, sends a trap, and
disables the port.
Note
Though this is not reflected in the Display Port Security menu, ports
operating in the Secure or Locked security mode discard all invalid
frames.
Participating
This column applies only when the intrusion action for a port operating
in the Limited security mode is set to trap or disable. This option does
not apply when intrusion action is set to No Action (discard). If this
option is set to No when intrusion action is set to trap or disable, the
port discards invalid packets, but it does not send a trap or disable the
port.