Allied Telesis AT-S63 - Manual (Page 622)

Chapter 33: PKI Certificates and SSL
622 Section IX: Management Security
The Modify Certificate menu is shown in Figure 223.
Figure 223. Modify Certificate Menu
Note
You cannot change selection 1, Certificate Name.
7. Type 2 to select State. The possible settings are:
Trusted
This value indicates you have verified that the certificate is from a
trusted CA. This is the default.
Untrusted
This value indicates the certificate is from an untrusted CA either
because you have not verified the CA or you have verified the CA is
untrusted.
8. Type 3 to select Type. The possible settings are:
EE
The certificate was issued by a CA, such as VeriSign. This is the
default.
CA
The certificate belongs to a CA.
Self
This certificate is a self-signed certificate. The switch treats this type of
certificate as its own.
9. Type 4 to select Modify Certificate.
Your changes are implement in the certificate.
The following message is displayed:
Please wait while certificate is updated...Done.
Allied Telesis AT-9424T/SP - AT-S63
Marketing
User: Manager 11:20:02 02-Mar-2005
Modify Certificate
1 - Certificate Name................. Switch12
2 - State ........................... Trusted
3 - Type ............................ Self
4 - Modify Certificate
R - Return to Previous Menu
Enter your selection?