Displaying the gvrp state machine – Allied Telesis AT-S63 User Manual
Page 513
AT-S63 Management Software Menus Interface User’s Guide
Section VI: Virtual LANs
513
Displaying the GVRP State Machine
To display the GVRP state machine, perform the following procedure:
1. From the Main Menu, type 2 to select VLAN Configuration.
The VLAN Configuration menu is shown in Figure 163 on page 474.
2. From the VLAN Configuration menu, type 6 to select Configure GARP-
GVRP.
The GARP-GVRP menu is shown in Figure 172 on page 498.
3. From the GARP-GVRP menu, type O to select Other GVRP
Parameters menu.
The Other GVRP Parameters menu is shown in Figure 176 on page
504.
4. From the Other GVRP Parameters menu, type 4 to Display GVRP
State Machine.
The GVRP State Machine menu (page 1) is shown in Figure 181.
Figure 181. GVRP State Machine Menu (page 1)
5. Enter a VLAN ID.
Allied Telesis AT-9424T/SP - AT-S63
Marketing
User: Manager
11:20:02 02-Mar-2005
GVRP State Machine
Enter a VLAN ID for displaying the state machine: [1 to 4094] -> 1