Allied Telesis AT-S63 - Manual (Page 243)

AT-S63 Management Software Menus Interface User’s Guide
Section II: Advanced Operations 243
Deleting an ACL
This procedure deletes an ACL from the switch. To perform this
procedure, you need to know the ID number of the ACL. To display ACL ID
numbers, refer to “Displaying ACLs” on page 246.
To delete an ACL, perform the following procedure:
1. From the Main Menu, type 7 to select Security and Services.
2. From the Security and Services menu, type 4 to select Access Control
Lists.
The Access Control Lists (ACL) menu is shown in Figure 78 on page
238.
3. From the Access Control Lists (ACL) menu, type 3 to selection Destroy
ACL.
The following prompt is displayed:
Available ACL(s): 0-15
Enter ACL ID : [0 to 255] -> 0
4. Enter the ID number of the ACL you want to modify. You can modify
only one ACL at a time.
The Destroy ACL window is displayed with the specifications of the
selected ACL. You can use this window to confirm that you are deleting
the correct ACL. An example of the window is shown in Figure 81.
Figure 81. Destroy ACL Menu
5. To delete the ACL, type D to select Destroy ACL. To cancel the
procedure, type R to select Return to Previous Menu.
Allied Telesis AT-9424T/SP - AT-S63
Marketing
User: Manager 11:20:02 02-Mar-2005
Destroy ACL
1 - ACL ID ............ 25
2 - Description ....... UDP-deny
3 - Action ............ Deny
4 - Classifier List ... 32
5 - Port List ......... 15,22
D - Destroy ACL
R - Return to Previous Menu
Enter your selection?