Konica Minolta Digital StoreFront User Manual
Page 147
Print Shops
147
6.
On the Create New dialog:
•
Type the Name of the new output device.
•
Type the URL of the output device.
Port 8010 is the standard port for JDF-enabled devices (and should generally be used,
e.g., http://[machine name or IP address]:8010).
•
From the Device Type pull-down menu, select EFI Fiery, Fiery XF, or JDF Connector.
•
JDF Configuration:
Consult the
chart below
for guidance on when to use process and intent for various
output devices.
•
Ticket Type:
Consult the chart below in section
Notes on JMF JDF Structure for Job Submission
for guidance on when to use process and intent for various output devices.
o
Process (default): Specifies actual information defining how the job is to be produced.
Use for Fiery outputs; contains Fiery-specific instructions.
o
Intent: Preserves print buyer’s intent for the file (buyer-entered web-form data
suggests, for example, that she intends to receive a 5,000 copies of a 100-page spiral
bound book on 8.5x11 white paper, with a glossy 100lb. four-color cover, full color,
etc.). Use for non-Fiery JDF outputs.
Process and Intent are the two main types of instructions gathered into a JDF job
ticket.