Konica Minolta Digital StoreFront - Manual (Page 468)

Digital StoreFront 5.2 Administration Reference
468
4. Click Update Filter in the Report Filters section.
5. Click Save.
6. Click View Report.
7. Configure the filter to define the scope of data in your report:
Clicking the filter icon causes the filter conditions panel for that data to open in the Report
Filters section. The conditions (i.e., configurable options) available will vary based on the column
header data you have chosen to filter.
•
Column Header: Name of the column header-level data you are filtering.
•
Operators: Limiters such as Less Than, Equal To, Greater Than; Equal To, In, Not In; Between; a
date range; etc. Operators vary by data type.
•
Parameters: The value you want to isolate for the data.