Manage characteristics – Konica Minolta Digital StoreFront User Manual
Page 297
Product Management
297
●
To edit media catalog entries
●
To add media catalog entries
●
To remove media from the catalog
●
To reassign media
●
To perform a bulk media import
●
To set a Final Width and Height for printed products
Manage Characteristics
Manage Characteristics (Media)
A media characteristic is some physical attribute of a media. Characteristics fall into the categories
color, hole pattern, size, type, and weight.
Media characteristics can be added and edited. Adding new media sizes and weights works well, and,
although you can also add new colors, prepunched hole patterns, and types, note that they may not
work well with all ticketing or media import/export systems; as a result, add these characteristics with
caution.
Use the table below as a guide:
Colors
Weights
Types
Holes
Size
MicroPress
See * note
below
Yes
custom types
listed as "paper"
Yes
Yes
Fiery (Pre-8)
See * note
below
Yes
custom types
listed as "paper"
Yes
Yes
Balance (Legacy)
See * note
below
Yes
custom types
listed as "paper"
Yes
Yes
Fiery 8
Yes (listed
with name
you assign)
Yes
Yes (listed with
name you
assign)
Yes
Yes
FJC
Yes (listed
with name
you assign)
Yes
Yes (listed with
name you
assign)
Yes
Yes
MIS/ESC
See * note
below
Yes
custom types
listed as "paper"
Yes
Yes
* Most colors will come through. The following will not:
●
Cyan-based colors
●
Magenta-based colors
●
Administrator-defined colors
To manage media characteristics
1.
On the Media Catalog > Manage Characteristics tab select the media characteristic you want to edit
from the Select Characteristic to Manage pull-down list.