Pioneer DVJ-X1 - Manual (Page 11)

Before Operating (Names and Functions of Parts)
7
<DRB1359> En
English
MODE
OUT
L
Y C B C R P R P B
R
S
S
SYNC IN
AUDIO OUT VIDEO OUT
COMPOSITE
PREVIEW OUT
DIGITAL
DJ
NORMAL
CONTROL
1 2 3 4
5 6 7 8 9 10
Names and Functions of Parts
Rear panel
1. POWER OFF (
—)/ON (_) switch
2. Main video output connectors (VIDEO OUT)
Includes RCA and BNC type connectors for outputting DVD
playback video only (composite signals), as well as S-Video
output connector.
3. Component video output connectors (Y, C B /P B , C R /P R )
BNC type connectors for component signal output of DVD
playback video only. Produces higher image quality than com-
posite output.
4. Mode select switch (MODE NORMAL/DJ) (☞ P.13)
If this switch position is changed during playback, playback
will stop, and then resume playback from the disc’s begin-
ning.
DJ: Allows use of jog dial operations, tempo variations and
other DJ functions. During DVD playback, no signal is output
from digital output connectors. Also, subtitles and certain
other functions and operations are not supported, and some
points cannot be played. During CD playback, only audio data
are output from digital connectors.
NORMAL: DJ functions are not supported. Pause mode is
silent, not audible. During DVD playback, selected audio sig-
nals are output from the digital output connectors. During
CD playback, digital data containing subcodes are output (does
not support CD graphics).
5. DIGITAL OUT connector
RCA type coaxial digital output, for connecting AV amplifier,
Dolby Digital/DTS decoder, CD recorder, etc.
When mode select switch (4) is set to “DJ”, no signal is
output from this connector during DVD playback. During CD
playback, only audio data without subcodes are output.
When mode select switch (4) is set to “NORMAL”, this
connector outputs digital data including subcodes.
6. CONTROL connector
Using the supplied accessory control cord, this connector can
be connected to a Pioneer DJ mixer (DJM-600, DJM-500,
DJM-300, DJM-909, DJM-707 or DJM-3000) to allow control
of this unit from the DJ mixer. This facilitates the use of func-
tions such as fader start play and back cue.
Alternately, linking this connector to another DJ player allows
automatic relay play (☞ P.38).
7. SYNC IN connector
BNC type input connector for inputting external sync signal.
Use to connect an optional sync signal generator.
8. AUDIO OUT L,R connectors
RCA type analog audio output connectors.
9. Preview video output connectors (PREVIEW OUT)
RCA type connector (composite signals) and S-Video output
connector. These connectors output monitor images used to
aid the DJ during operation. Outputs various guide messages
and displays (☞ P.11).
10. AC inlet
Use auxiliary power cord to connect to standard electrical
outlet.