Pioneer DVJ-X1 - Manual (Page 27)

Preparations (Setup)
23
<DRB1359> En
English
Select video output format
When the television monitor used is connected for component
video and supports progressive inputs, set this option to select
the kind of player output, either interlace scan or progressive
scan.
—
Audio1 Video1 Language General A2 V2
Exit Move
TV Screen
Component Video
16:9(Wide)
Interlace
Progressive
SETUP
Interlace:
Select this option when the television or projector does not sup-
port progressive inputs (factory default setting).
Progressive:
This mode produces finely detailed, high-definition images and
should be selected when using a television or projector that sup-
ports progressive inputs.
¶ If this player is set to output progressive-scan video, it’s pos-
sible that the picture will appear stretched when playing discs
recorded in 4:3 format. This happens when the TV’s aspect
ratio is set ‘Full’. To see the picture in its correct aspect ratio,
change the TV setting to ‘Normal’.
If your TV doesn’t have settings to change the aspect ratio of
the picture, set this player to 16:9 (Compressed).
Note:
If you connect a TV that is not compatible with a progressive scan
signal and choose one of the progressive scan settings, you will not
be able to see any picture at all. With your TV connected using ei-
ther the composite or S-Video terminals, choose the Interlace set-
ting in the Component Video menu.
Compatibility of this unit with progressive-scan TVs.
CONSUMERS SHOULD NOTE THAT NOT ALL HIGH DEFINITION
TELEVISION SETS ARE FULLY COMPATIBLE WITH THIS PROD-
UCT AND MAY CAUSE ARTIFACTS TO BE DISPLAYED IN THE
PICTURE. IN CASE OF 525 PROGRESSIVE SCAN PICTURE PROB-
LEMS, IT IS RECOMMENDED THAT THE USER SWITCH THE CON-
NECTION TO THE “STANDARD DEFINITION” OUTPUT. IF THERE
ARE QUESTIONS REGRADING OUR TV SET COMPATIBILITY
WITH THIS MODEL 525p DVD PLAYER, PLEASE CONTACT OUR
CUSTOMER SERVICE CENTER.
Select S-Video output (Expert Mode)
Set this option to select the video signal output from the S-Video
connector.
¶ When the S-Video connector is used to connect the player to
a television set, the image may appear vertically compressed
(or stretched horizontally). In this case, select [S1].
—
—
—
Audio1 Video1 Language General A2 V2
Exit Move
TV Screen
Component Video
S-Video Out
Screen Saver
16:9(Wide)
Interlace
S1
S2
SETUP
S2:
The S2 video signal is output (factory default setting).
S1:
The S1 video signal is output.
Screen Saver setting (Expert mode)
The screen saver function is provided in order to prevent image
burn (residual image) on a television screen when a single image
is paused or otherwise remains on the screen for an extended
period of time.
¶ When enabled, the screen saver function operates after an
image has been displayed for about five minutes.
—
—
—
—
Audio1 Video1 Language General A2 V2
Exit Move
TV Screen
Component Video
S-Video Out
Screen Saver
16:9(Wide)
Interlace
S2
On
Off
SETUP
On:
Screen saver function is enabled (factory default setting).
Off:
Screen saver function is disabled.
★ In DJ mode, the screen saver function does not operate
when the unit is in pause mode.
Video quality adjust
The video quality can be set to provide optimum reproduction of
specific types of image (movies, animation, etc.). Further, each
of the video image quality options can be set individually, and
each setting can be recorded in memory. If playback is performed
while displaying the initial setup menu, the picture quality can be
adjusted while viewing the actual television image.
To select a preset picture quality
1. Using the four sides of the cursor button ( 2/3/
5/∞), select [Video2] \ [Video Adjust] \ [Start].
—
—
Video2 A2 Language General Audio1 V1
Exit Move
Background
Video Adjust
Pioneer Logo
Start
Picture Quality Controls
SETUP
S1 Video Output:
S1 is S-Video with added signal for discrimination of aspect
ratio (4:3, 16:9).
S2 Video Output:
S2 is the S1 signal with the addition of another signal for dis-
crimination of the picture viewing format (letter box, pan and
scan). When played on a wide television supporting S2, the
appropriate picture mode will be selected automatically.