Pioneer DVJ-X1 - Manual (Page 36)

Basic Operations
32
En <DRB1359>
MODE
NORMAL/DJ
PLAY/
PAUSE
CUE
ANGLE
AUDIO
TOUCH/
BRAKE
RELEASE
/START SUBTITLE
To change language/subtitle settings
during playback (DVD only)
■ To change language during playback:
The language setting can be changed during playback when the DVD
has been recorded with multiple language options.
Press the AUDIO button.
The currently selected audio (language) option will be displayed on the
screen. Each time the button is pressed the language will alternate be-
tween the available language options.
¶ If the language is changed when the player is in DJ mode, both video
and audio playback will be temporarily interrupted (due to writing to
buffer memory).
¶ Some discs do not allow the audio language option to be changed
with the AUDIO button (pressing the button will cause the prohibited
mark
to light, and the corresponding prohibited mark will ap-
pear on the screen). In this case, go to the disc’s main menu to switch
the language option.
¶ When a disc is removed from the player, the language setting will
revert to that selected on the Setup Menu (☞ P.25).
¶ With some discs, changing the language will cause the image to pause
momentarily.
■ Changing the subtitle option during playback
★ This option is not supported when the rear panel mode select
switch (MODE NORMAL/DJ) is set to DJ (subtitles are not dis-
played in DJ mode).
The subtitle language can be changed when the DVD has been recorded
with multiple subtitle language options.
Press the SUBTITLE button.
The currently selected subtitle option will be displayed on the screen.
Each time the button is pressed, the subtitle language will alternate be-
tween the available options; if OFF is selected, subtitles will not appear.
¶ Some discs do not allow the subtitle option to be changed with the
SUBTITLE button (pressing the button will cause the prohibited mark
to light, and the corresponding prohibited mark will appear on
the screen). In this case, go to the disc’s main menu to switch the
subtitle language.
¶ When a disc is removed from the player, the subtitle setting will re-
vert to that selected on the Setup Menu (☞ P.26).
Changing the viewing angle (DVD only)
Alternate viewing angles can be selected during playback of DVDs re-
corded with multiple angles.
¶ DVDs recorded with multiple angles display the mark on their jacket.
During playback, when the mark is displayed,
press the ANGLE button.
Each time the button is pressed the angle view alternates between those
available.
Angle : 1/4
»
Angle : 4/4
¶ If the angle is changed when the player is in DJ mode, both video and
audio playback will be temporarily interrupted (due to writing to buffer
memory).
¶ Some discs may not allow changing of the viewing angle, even though
they display the mark.
¶ While in NORMAL mode or the main unit’s display shows “DISABLE
DJ MODE” message, the pause mode will be released if the angle is
changed during playback pause.
¶ Some DVDs allow changing of the angle by means of the disc’s main
menu as well.
To turn off the angle indicator
While in NORMAL mode, go to the Setup Menu and set [Angle Indica-
tor] to [Off] (☞ P.25).
Regardless of the setting of the Setup Menu’s [Angle Indicator], when in
DJ mode, the
mark will not appear in individual scenes during playback.
When display mode is ON, the mark will be displayed within the guide
area of the preview monitor, during the playback of points that allow the
selection of alternate angles.
To temporarily interrupt playback (pause mode)
During playback, press the PLAY/PAUSE (
6) button.
¶ The outer rim indicators of the PLAY/PAUSE (6) button and CUE
button will flash, and playback will be interrupted.
¶ Some DVDs prohibit the use of playback pause; in this case pressing
the PLAY/PAUSE ( 6) button will cause the prohibited mark to
light, and the corresponding prohibited mark will appear on the
preview monitor.
¶ If the PLAY/PAUSE (6) button is pressed when the unit is in the
pause mode, the button rim indicators will go out and playback will
resume.
¶ If the pause mode is allowed to continue for 80 minutes or more, the
disc playback will automatically stop. In this case, press the PLAY/
PAUSE (
6) button to resume playback.
[In DJ mode, with jog mode set to VINYL mode OFF]
¶ Placing the player in pause mode enables audible pause (the video
image appears as a still image, but audio sound can be heard inter-
mittently). If sound is not desired in this case, lower the audio mixer’s
output level.
[In DJ mode, with jog mode set to VINYL mode ON]
¶ Placing the player in pause mode enables silent pause (still image
with no sound).
¶ The TOUCH/BRAKE response dial can be used to modify the disc’s
deceleration speed (time until playback stops).
¶ The RELEASE/START response dial can be used to modify the disc’s
playback acceleration time (time until disc reaches full playback speed).
[In NORMAL mode]
¶ Placing the player in pause mode enables silent pause (still image
with no sound).
Angle : 2/4
Angle : 3/4
\
|
«