Philips Robot de cocina User Manual

Page 12

Advertising
background image

12

2

To reassemble, push the beaters back into the balloon beater

housing.
citrus press

Always clean the citrus press immediately after use.

The citrus press can be cleaned in the dishwasher. You can also pull the

cone from the sieve to clean them separately.

1

Pull the cone from the sieve (Fig. 41).

2

To reassemble, push the cone back on the sieve of the citrus press.

storage

1

Push the cord into the cord storage compartment on the back of

the motor unit. (Fig. 42)

Environment

- Do not throw away the appliance with the normal household waste

at the end of its life, but hand it in at an official collection point for

recycling. By doing this, you help to preserve the

environment (Fig. 43).

guarantee & service

If you need service or information or if you have a problem, please visit

the Philips website at www.philips.com or contact the Philips Consumer

Care Centre in your country (you find its phone number in the

worldwide guarantee leaflet). If there is no Consumer Care Centre in

your country, go to your local Philips dealer.

troubleshooting

This chapter summarises the most common problems you could

encounter with the appliance. If you are unable to solve the problem with

the information below, contact the Consumer Care Centre in your

country.

EnglisH

12

Problem

Solution

When I select a

speed or press the

pulse/Easy Clean

button, appliance

does not start to

operate.

Make sure the food processor or blender jar and

its lid are assembled correctly (‘click’).Make sure

that the tool holder has been inserted properly if

you are using any accessory with the food

processor bowl. If you use the blender jar, make

sure that the handle of the blender points to one

of the four corners of the motor unit. Keep the

lid fixed to avoid spillage. If you use the food

processor, make sure that the bowl handle is

directly above the closed lock symbol. The bowl

lid is correctly assembled when the projection is

locked into the slot of the bowl handle. If all parts

are assembled correctly, the appliance starts to

operate when you select a speed with the speed

selector or press the pulse/Easy Clean button.

The

appliance suddenly

stops running.

The thermal safety cut-out has probably cut off

the power supply to the appliance because the

appliance has overheated. 1) Unplug the

appliance. 2) Let the appliance cool down for 1

hour. 3) Put the mains plug in the socket. 4)

Switch on the appliance again.

I have selected the

wrong speed for

the attachment I

want to use.

Check the colour of the attachment and choose

the corresponding speed with the speed selector.

The emulsifying

disc, balloon

beater or kneading

accessory does not

turn.

Make sure the emulsifying disc, balloon beater or

kneading accessory is assembled properly onto

the tool holder. Also make sure the food

processor bowl and the lid are assembled

properly (‘click’).

Advertising