ElmoMC SimplIQ Digital Servo Drives-Solo Trombone Installation Guide User Manual
ElmoMC Hardware
Advertising
Table of contents
Document Outline
- Chapter 1: Safety Information
- Chapter 2: Introduction
- Chapter 3: Installation
- 3.1. Before You Begin
- 3.2. Unpacking the Drive Components
- 3.3. Pinouts
- 3.4. Main Buffered Output Port
- 3.5. Auxiliary Feedback (Bi-Directional)
- 3.5.1. Main and Auxiliary Feedback Combinations
- 3.5.2. Solo Trombone Auxiliary Feedback – Differential Buffered Encoder Output (YA[4]=4)
- 3.5.3. Auxiliary Feedback - Differential Encoder Input Option (YA[4]=2)
- 3.5.4. Auxiliary Feedback – Differential Pulse-and-Direction Input Option (YA[4]=0)
- 3.5.5. I/Os
- 3.5.6. Digital Output
- 3.5.7. Analog Input
- 3.5.8. Communication
- 3.6. Powering Up
- 3.7. Initializing the System
- 3.8. Heat Dissipation
- Chapter 4: Technical Specifications
- 4.1. Features
- 4.2. Solo Trombone Dimensions
- 4.3. Power Ratings
- 4.4. Environmental Conditions
- 4.5. Control Specifications
- 4.6. Feedbacks
- 4.7. I/Os
- 4.8. Communications
- 4.9. Pulse-Width Modulation (PWM)
- 4.10. Brake
- 4.11. Compliance with Standards