Lenze PLC Designer ApplicationTemplate (PLC Designer R3-x) - Manual (Page 109)

Lenze · ApplicationTemplate · 1.3 EN - 04/2013
109
Visualising in the ApplicationTemplate
Adding a visualization: Standard procedure
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
• Example: In order to insert a window
for activating errors for a specific
machine module, select the
L_EATP.L_EATP_VisErrorSet
visualization.
Example: Assigning the visualization for the ErrorsA block of
the App1 module application of Module1.
• Assign the L_EATP.L_EATP_VisErrorSet
visualization to the data source:
• Assign the corresponding data
source in the Properties dialog
window.
• Tip: The predefined visualization
elements of the ApplicationTemplate
require no manual data assignments.
• Therefore (after the compilation
process), logging in (going online) is
possible without any extra effort
involved.