Working with the applicationtemplate – Lenze PLC Designer ApplicationTemplate (PLC Designer R3-x) User Manual
Page 46
Working with the ApplicationTemplate
Mapping the actual machine structure in the »PLC Designer«
46
Lenze · ApplicationTemplate · 1.3 EN - 04/2013
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
6. Use the
Add Device command to insert a logic device (slave) under the
CANopen_Manager (master).
Select the desired CAN node from the
selection list.
Tip!
A general device description is provided for the integration of inverters: Lenze Generic
Drive.
Repeat the
Add device command until all slaves connected to the bus are implemented
in the device view. Optionally, you can Copy and Paste a node already inserted into the
context menu of the device. The communication settings (node ID and baud rate as well as
further parameters) must be adapted manually afterwards.