2 sample program mm_machine machine module, Appendix – Lenze PLC Designer ApplicationTemplate (PLC Designer R3-x) User Manual
Page 138
Advertising
Appendix
The sample program in the ApplicationTemplateCounter
138
Lenze · ApplicationTemplate · 1.3 EN - 04/2013
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
12.2.2
Sample program MM_Machine machine module
The
MAP_Machine_App1 module application of the MM_Machine machine module contains
the following functions:
• Add the value of module 1 to the value of module 2:
<value module1> + <value module2>
• Subtract the value of module 2 from the value of module 1:
<value module1> - <value module2>
Advertising