Lenze PLC Designer ApplicationTemplate (PLC Designer R3-x) - Manual (Page 36)

Opening the ApplicationTemplate
Getting started - operating the ApplicationTemplate
36
Lenze · ApplicationTemplate · 1.3 EN - 04/2013
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
• The buttons in area  can be used to select the
visualization of the desired machine module.
• Machine / machine control calls the highest machine
control module.
• Button  calls the detailed view of the machine
modules.
• Button  calls the global error overview.
• Area displays the state machine (with the current status).

State machine ( 21)
• Area displays the L_EATP_ErrorSet FB.  L_EATP_ErrorSet ( 119)