Lenze PLC Designer ApplicationTemplate (PLC Designer R3-x) - Manual (Page 163)

Lenze · ApplicationTemplate · 1.3 EN - 04/2013
163
Application example: Flying saw
Application example: Extending the visualization
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
13.5 Application example: Extending the visualization
The ApplicationTemplate contains a visualization of the machine modules. The following section
describes how to adapt the visualization individually.
Extending the L_Main main visualization: Visualization of a machine module
[13-5] Structure of the visualization in the ApplicationTemplate
In order to insert the visualization of a machine module into the L_Main main visualization and
make it visible, it must be extended in two ways.
1. In the L_Main main visualization: On the right, the visualization pages display the following
information in switchable area

: module list, error list, visualization of the selected machine
module.
In order to be able to display the visualization of a module, it must be added to the frame
selection of the visualization page / switchable area

.
2. In the Keys_Main visualization: In order to call the module visualization, a button must be
created.

How to proceed:
1. Call the visualization in the device tree:
Double-click and open: 20_Visualisation L_Main
2. Open the visualization element list:
• Call <Alt>+<F6> or the menu command Visualisation Element list.
• Go to the Element list tab and select the #0 Frame visualization:
• Select the VisualizationFrame selection menu command:
L_Main: Main visualization for central operation
Keys_Main/ Top_Master: Subelements of the visualization for navigation elements / GUI.
 Switchable area: Visualization pages